4.8
Owner's of the Accusplit Digital Camera Electronic Viewfinder gave it a score of 4.8 out of 5. Here's how the scores stacked up:
8(E)
The following table shows the relationship between
switch 3 settings and the times when the PEAKING
control and the PEAKING adjustment screw are
enabled and disabled.
(Yes: Enabled, No: Disabled)
Switch 4
Selects whether the magnified section of the picture is
fixed as the center section or can be selected from the
upper left, upper right, lower left, lower right, and
center sections.
OFF: Selectable from among the 5 sections.
ON: Fixed as the center section.
In this case, the display automatically returns to
normal about 5 seconds after the MAG button is
pressed.
Switch 5
This switch is provided for service purposes. Normally
it should be left in the OFF position.
Switches 6 to 8
Adjust color temperature.
Note
Color temperature does not change except by the
above switch combinations. The screen display
luminance decreases as a result of color temperature
adjustment.
2 Switch cover
Protects the setting switches 1 against moisture and
foreign objects.
Over time the cover may become cracked. If this
occurs, it should be exchanged.
Sony part number: 3-776-614-01
Note
To protect the setting switches, always replace the
cover after setting the switches.
PEAKING
Switch 3 OFF Switch 3 ON
SEL1/SEL2 switch MAG button
SEL1 SEL2 ON
(Magnified
display)
OFF
(Normal
display)
Control Yes No No Yes
Screw No Yes Yes No
Switch Color temperature
67 8
OFF OFF OFF Factory default (approx. 6500K)
ON OFF OFF Decreases approx. 500K (becomes
reddish)
OFF ON OFF Increases approx. 500K (becomes
bluish)
ON ON OFF Increases approx. 1000K (becomes
bluish)
OFF OFF ON Increases approx. 1500K (becomes
bluish)
Location and Function of Parts
Find Your Products By Category
Please Login
