ATN Binoculars ATN NVG7 User Manual

0

Out of 0 Ratings

Owner's of the ATN Binoculars ATN NVG7 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 8
 
4
HELMET MOUNT
(OPTIONAL)
Helmet mount for attachment of ATN’s NVG-7 to a standard PASGT helmet. Helmet mount fits
securely onto helmet via a rugged strapping device and grooved hooks. With helmet mount,
NVG-7 can be positioned directly in front of user’s eyes or flipped.
INSTALLATION
1) Install the mount onto helmet as shown on the picture.
2) Tighten and fixate the straps [1]
3) Attach goggles to the rail. Push button [2] and insert
the bracket of the NVG-7 to the rail of the mount.
4) Place the helmet on your head.
ADJUSTMENT
1) Loosen the screw [3] and move the unit along the rail
for eye relief adjustment. Tighten the screw [3].
2) Loosen the top vertical fixation screw [4]. Adjust gog-
gle vertical position. Tighten vertical position screw.
3) The NVG-7 helmet mount has a flip-up mechanism. Push a button [5] on the side of mount
and lift the unit up till fixation in the top position.
FLIP-UP HEADSET
FITTING THE HEADGEAR
1) Fit the headgear to your head size. Adjust the head-
gear fist before attaching the NVG-7 to it.
2) Loosen all the straps and place the headgear onyour
head.
3) Tighten the straps until the headgear fits firmly.
GOOGLES INSTALLATION AND AJUSTMENT
Now you are ready to mount the NVG-7 on to your
headgear.
1) Remove the already adjusted headgear from your
head.
2) Push button [1] and insert the bracket [2] of the
NVG-7 to the rail of the headset.
3) Place the headgear with NVG-7 onto your head.
4) Loosen the screw [3] and move the unit along the rail
for eye relief adjustment .
The NVG-7 headset has a flip-up mechanism. Push the
button [4] on the side of mount and lift the unit up until the
unit fixates in the top position.
Push same button to lower NVG-7 to viewing position.
If you need increase the eye relief of your goggles, you
can displace the bracket on the top of NVG-7.
1) Unscrew the screw and detach the end-cap from
the bracket of NVG-7.
2) Unscrew the 2 screws and detach the bracket from
the NVG-7 body.
3) Turn the bracket 180 degrees.
4) Screw the 2 screws back into place.
4
1
3
2
2
1
1
3
4
5

   Find Your Products By Category