0

Out of 0 Ratings

Owner's of the Nikon Digital Camera 26358 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 224
 
23
Step 3 Frame a Picture
Basic Steps for Shooting and Playback
C Using a Tripod
We recommend using a tripod to stabilize the camera when shooting in the following situations:
- When shooting in dim lighting or when the flash mode (A45) is set to W (Off).
- When using the telephoto setting.
Set Vibration reduction in the setup menu (A74) to Off when using a tripod to stabilize the
camera during shooting.
Using the Zoom
Use the zoom control to activate optical zoom.
To zoom in closer to the subject, rotate the zoom
control to g (telephoto).
To zoom out and view a larger area, rotate the zoom
control to f (wide-angle).
When you turn the camera on, the zoom moves to
the maximum wide-angle position.
A zoom indicator is displayed at the top of the
monitor when the zoom control is rotated.
Digital zoom, which allows you to magnify the
subject up to approximately 4× beyond the
maximum magnification of the optical zoom, can
be activated by rotating and holding the zoom control to g when the camera is
zoomed in to the maximum optical zoom position.
C Digital Zoom and Interpolation
While using digital zoom, the image quality decreases due
to interpolation when the zoom is increased beyond the V
position. Since the position of V moves to the right as the
size of an image decreases, selecting a smaller image size in
the image mode setting (A53) allows you to zoom in
further without decreasing the image quality due to
interpolation.
Zoom out Zoom in
Optical
zoom
Digital
zoom
Small image size