Olympus Digital Camera V107050BU000 User Manual

0

Out of 0 Ratings

Owner's of the Olympus Digital Camera V107050BU000 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 88
 
34
EN
Setting the Touch Shutter function
Setting the Touch Shutter function
z
z
[Touch Shutter]
[Touch Shutter]
Submenu 2 Application
On
The subject that is touched is
focused on and the picture is
taken automatically.
Off
The subject that is touched is AF
locked. (Press the shutter button
manually.)
● This setting can also be changed by touching the
panel. “Using for the shooting mode” (p. 9)
Selecting the focusing area
Selecting the focusing area
z
z
[AF Mode]
[AF Mode]
Submenu 2 Application
Face/iESP
The camera focuses
automatically. (If a face is
detected, it is shown by a white
frame
*1
; when the shutter button is
pressed halfway and the camera
focuses, the frame turns to
green
*2
. If no face is detected, the
camera chooses a subject in the
frame and focuses automatically.)
Spot
The camera focuses on the
subject located within the AF
target mark.
AF Tracking
The camera tracks the subject
movement automatically to focus
on it continuously.
*1
For some subjects, the frame may not appear or
may take some time to appear.
*2
If the frame blinks in red, the camera cannot focus.
Try refocusing on the subject.
To focus on a moving subject
To focus on a moving subject
continuously (AF Tracking)
continuously (AF Tracking)
1 Hold the camera to align the AF target mark on
the subject and press the A button.
2 When the camera recognizes the subject, the
AF target mark automatically tracks the subject
movement to focus on it continuously.
3 To cancel the tracking, press the A button.
● Depending on the subjects or the shooting
conditions, the camera may be unable to lock the
focus or fail to track the subject movement.
● When the camera fails to track the subject
movement, the AF target mark changes to red.
Selecting the method for
Selecting the method for
measuring the brightness
measuring the brightness
z
z
[ESP/
[ESP/
n
n
]
]
Submenu 2 Application
ESP
Shoots to obtain a balanced
brightness over the entire screen
(Meters the brightness at the
center and surrounding areas of
the screen separately).
5 (spot)
Shoots the subject at the center
during backlighting (Meters the
brightness at the center of the
screen).
● When set to [ESP], the center may appear dark
when shooting against strong backlighting.

   Find Your Products By Category