Sony Home Theater Server HES-V1000 User Manual

0

Out of 0 Ratings

Owner's of the Sony Home Theater Server HES-V1000 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 155
 
121
Changing the Server Settings
Network Settings
Internet Settings Quickest way to get started
Connect the server to the Internet. See page 26 for connection details. For use of
routers and gaming adapters, refer to the device's operating instructions.
1 Check that [IP Address Acquisition] is set to [Use DHCP].
2 Select [Network Diagnostic] and press ENTER.
3 Select [Start] and press ENTER.
4 Check that a message, [Connection to the network is correct] appears.
The setup is finished when this message appears. If it does not appear, follow the on-
screen messages and check the following settings. And also see page 134 for possible
causes.
IP Address Acquisition
• Use DHCP
Select this when DHCP (Dynamic Host Configuration Protocol) server settings are
available from your Internet service provider. The network settings necessary for the
server will be assigned automatically. Contact the service provider for information.
• Use static IP address
Set the IP address manually according to your network environment.
Additionally, you will need to configure the following items:
–Subnet Mask
–Default Gateway
–[DNS Server (Primary)]/[DNS Server (Secondary)] *
1
You will need to contact your Internet service provider (ISP) or the network
administrator for this information.
*
1
[DNS Server Auto Aquisition] is available only when you select [Use DHCP].
You can set the [DNS Server (Primary)] and [DNS Server (Secondary)] addresses manually if
you set [DNS Server Auto Acquisition] to [Off]. In this case, be sure to enter the [DNS Server
(Primary)] address, otherwise the [Network Settings] will not be set correctly.
If your ISP has a specific proxy server setting, select [Proxy Settings] and enter the
setting.
For more information regarding network configuration, contact “Home Entertainment
Server” Customer Call Center:
1-877-531-SONY (7669).
–These items are necessary when you connect
to the Internet via an Ethernet cable to use the
AMG service. Refer to the Internet service
provider’s instructions and select the settings
appropriate for your network environment.
Internet Settings
Music Server Settings
Settings
,continued

   Find Your Products By Category