0

Out of 0 Ratings

Owner's of the Sony Home Theater Server HES-V1000 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 155
 
127
Other Remote Uses
Programming AV components to the
device selection buttons
You can use the remote with Sony and other branded AV
components. To use with other AV components, set the
component’s manufacturer code to the corresponding device
button on the remote (TV, VCR, CUSTOM buttons, etc.).
Codes that can be entered vary depending on the device selection
button (page 127).
a While holding down RM SETUP, press AV
\/1.
The RM SETUP button flashes.
b Press the desired device selection button
before the RM SET UP button stops flashing.
Both the RM SETUP button and the device selection
button flash.
c Enter the three-digit manufacturer code
using the number buttons (page 127).
For example, to enter 901, enter “9,” “0,” “1.”
d Press ENTER.
The RM SETUP button flashes twice and turns off.
z Hints
To exit the above procedures, press RM SETUP.
When more than one code is listed, try until you find the one that
works.
If you cannot finish entering the code, repeat from step 1.
Operating registered devices
a Press the device selection button (TV, AMP,
SAT/CABLE, VCR, or CUSTOM) to change
the remote’s mode.
The button lights up and remains lit for about 30
seconds.
You can operate the device until the device selection
button turns off and the remote returns to the server
mode.
Manufacturer code lists
Default Settings
The following codes are set to the device selection buttons by
default.
*1
Only the AV \/1, MUTING, VOL +/– buttons will work.
*2
TV codes (5xx) and AV amplifier codes (9xx) can be assigned to this
button.
*3
The following button functions are added to the AMP button. Refer
also to the instructions supplied with the amplifier.
z Hint
To use the “ON SCREEN” function on a Sony AV amplifier, press
AMP, then press POP UP/MENU.
For AV amplifiers
For tuners
For CD players
For tape/DAT decks
For tape decks
SERVER 501 (Sony TV)
*1*2
TV 501 (Sony TV)
AMP 905 (Sony amplifier)
*3
SAT/CABLE 801 (Sony satellite tuner)
VCR 703 (Sony VCR)
CUSTOM
Button Function Name
RED 2CH
GREEN A.F.D.
BLUE MOVIE
YELLOW MUSIC
POP UP/MENU ON SCREEN
Manufacturer Code
Sony 905 906 907 908 909
Pioneer 910 913 920 930 932 934 935
Denon 911 916 917 918 923 924
Yamaha 912 919 927 938
JVC 914 915 928 929 931 936
Harman/Kardon 922
Onkyo 921 925 926 933
Manufacturer Code
Sony 002 005
Manufacturer Code
Sony 101 102 103
Denon 123 104
JVC 105 106 107
Kenwood 108 109 110
Magnavox 111 116
Marantz 116
Onkyo 112 113 114
Panasonic 115
Philips 116
Pioneer 117
Technics 115 118 119
Yamaha 120 121 122
Manufacturer Code
Sony 203
Pioneer 219
Manufacturer Code
Sony 201 202
Denon 204 205
Kenwood 206 207 208 209
Nakamichi 210
Panasonic 216
Philips 211 212
Pioneer 213 214
Technics 215 216
Yamaha 217 218
,continued