Sony Home Theater Server HES-V1000 User Manual

0

Out of 0 Ratings

Owner's of the Sony Home Theater Server HES-V1000 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 155
 
22
D Holding the glass panel to the side, push the
lever back to its original position.
The panel is locked.
Push the lever all the way through till it remains flush
the back panel surface.
E Repeat steps 1 to 4 to attach the other panel.
Use the supplied cleaning cloth to wipe the glass
surfaces. The cleaning cloth is included in the
accessory pack.
Note
If the unit is brought director from a cold to a warm location, or is placed
in a very damp room, moisture may condense on the unit. If this happens,
leave the unit without connecting the power cord for about six hours,
until the moisture evaporates.
Observe the following precautions when
moving the unit.
• Be sure to remove all discs before turning off the power.
• Attach the two lock screws and the lock stick to the unit.
Be sure to disconnect the power cord when attaching them.
Use the supplied carton and cushions for transportation.
Step 2: Checking the
Accessories
The following items are supplied in the accessory pack:
• Audio/video cable (phono plug × 3) (1)
• LAN cable with Ferrite Clamp (Ferrite EMC Filter) (1)
• HDMI cable (1)
• Power cord (1)
• Remote commander
®
(remote control) (1)
• Size AA (R6) batteries (2)
• Cleaning cloth (1)
• Dust-tight seals (6)
• “Music Transfer” installation CD (1)
Push the lever inside
2
1
Lever not engaged, panel not
firmly locked

   Find Your Products By Category