Panasonic DVR DIGA User Manual

4.3

Out of 16 Ratings

Owner's of the Panasonic DVR DIGA gave it a score of 4.3 out of 5. Here's how the scores stacked up:

  • Reliability

    4.4 out of 5

  • Durability

    4.19 out of 5

  • Maintenance

    4.44 out of 5

  • Performance

    4.31 out of 5

  • Ease of Use

    4.13 out of 5
of 84
 
32
RQT8432
Timer recording
Refer to the control reference on page 28.
When the recording drive is “DVD” and there is not enough
remaining space, recording automatically switches to the “HDD”. If
there is no disc in the tray or the disc cannot be recorded on or when
timer recording starts while copying, the recording drive will be
altered to the HDD.
≥The Direct Navigator shows which programmes were relief-
recorded (“ ” is displayed.) (➡ 34).
≥If the time remaining on the HDD is insufficient, as much of the
programme as possible will be recorded onto the HDD.
≥Relief recording is not activated when recording the programme
with VPS/PDC and it is extended so that it no longer fits on the
disc.
[HDD]
If you record a programme onto HDD repeatedly everyday or every
week using timer recording, the unit will record the new programme
over the old one.
This function can be used only when weekly recording or daily
recording is selected.
1 Press [PROG/CHECK].
2 Press [3, 4] to select the programme
and press [ENTER].
3 Press [2, 1] to select “RENEW”
column.
4 Press [3, 4] to select “ON” and press
[ENTER].
[Note]
≥If a programme set for Auto Renewal Recording is protected or
while play back is taking place from the HDD, or while copying, the
programme will not be overwritten. Instead the programme set for
recording will be saved as a separate programme, and this
programme will be the one to be overwritten when the next Auto
Renewal Recording takes place.
≥Playlists made from programmes that were set for Auto Renewal
Recording are deleted along with auto renewal.
≥When there is not enough space on the HDD, the programme may
not be recorded completely.
VPS (Video Programme System) or PDC (Programme Delivery Control) is a very convenient system which records exactly from beginning to end
of the TV programmes set in timer recording, even if the actual broadcasting time differs from the scheduled time due to delayed start or extension
of the programme duration. Also, if a programme is interrupted, for example, some special news is inserted, the recording will be paused
automatically and resumed when the programme continues.
[Note]
≥The beginnings of recordings may not be recorded correctly in some cases.
≥Depending on the signals sent from the TV stations, the VPS/PDC system may not work properly even when “VPS/PDC” has been set to “ON”.
≥Please check with the broadcasters in your area for details.
≥VPS/PDC does not activate while this unit is on. The system stays inactive under the condition even its setting is “ON”. In such cases, recording
starts and finishes at times you set initially.
Relief Recording
Auto Renewal Recording
Timer
Recording
1:58 SP
DVD
30:24 SP
HDDRemain
12:54:00 15. 7. TUE
Mode
StopStartName Date
VPS
PDC
HDD
DVD
22:3022:00SUN OFFHDD
1 ARD
Programme Name
SP
RENEW
ON
VPS/PDC function
When VPS/PDC recording ≥Use VPS/PDC time for recording the TV programmes.
≥Set “VPS/PDC” to “OFF” when recording time is not VPS/PDC time.
≥VPS/PDC recording is not performed when VPS/PDC time is incorrect, even if only by one
minute. To find out VPS/PDC time, consult Teletext, a newspaper or magazine, or other source.
–If a programme listed in a newspaper or magazine has two S
HOWVIEW numbers, use the
S
HOWVIEW number for VPS/PDC if you wish to proceed with VPS/PDC recording using
S
HOWVIEW programming.
–The default settings for “VPS/PDC” is
“OFF”
.
When the VPS/PDC signal drops out
because the broadcast signal is weak.
When a TV station does not transmit a
regular VPS/PDC signal.
Timer recording will be performed in the normal mode (without VPS/PDC) even if it was
programmed for VPS/PDC.
In this case, even if the timer recording is performed, whatever has been programmed will not be
cancelled at that particular time but at 4 a.m. two days later.
If the start times of scheduled
programmes listed in the newspaper or
magazine change at a later date.
Set “VPS/PDC” to “OFF” when programming a programme whose start time has been
subsequently changed.
EH65.book Page 32 Thursday, March 23, 2006 5:18 PM

   Find Your Products By Category