4.3
Owner's of the Panasonic DVR DIGA gave it a score of 4.3 out of 5. Here's how the scores stacked up:
80
RQT8432
Troubleshooting guide
GUIDE Plus+
To reset this unit
Bitstream
This is the digital form of multi-channel audio data (e.g., 5.1 channel)
before it is decoded into its various channels.
CPPM (Content Protection for Prerecorded Media)
A copy protection system used for DVD-Audio files. This unit
supports CPPM.
CPRM (Content Protection for Recordable Media)
CPRM is technology used to protect broadcasts that are allowed to
be recorded only once. Such broadcasts can be recorded only with
CPRM compatible recorders and discs.
Decoder
A decoder restores the coded audio signals on DVDs to normal. This
is called decoding.
DivX
A video compression format developed by DivXNetworks, Inc. that
compresses video files without any considerable loss of video
quality.
Dolby Digital
This is a method of coding digital signals developed by Dolby
Laboratories. Apart from stereo (2-channel) audio, these signals can
also be multi-channel audio. A large amount of audio information can
be recorded on one disc using this method.
When recording on this unit Dolby Digital (2 channel) is the default
audio.
Down-mixing
This is the process of remixing the multi-channel audio found on
some discs into two channels. It is useful when you want to listen to
the 5.1-channel audio recorded on DVDs through your television’s
speakers. Some discs prohibit down-mixing and this unit can then
only output the front two channels.
[DVD-A] Tracks that do not allow down-mixing will not play correctly
on this unit except when connecting with an HDMI cable to an
amplifier that meets HDMI Ver. 1.1 standards and is CPPM
compatible.
DPOF (Digital Print Order Format)
DPOF is the standard printing format for still picture data taken by a
digital camera, etc. It is used for automatic printing at a photo
developing store or on your home printer.
Drive
In the instance of this unit, this refers to the hard disk (HDD), disc
(DVD) and SD card (SD). These perform the reading and writing of
data.
DTS (Digital Theater Systems)
This surround system is used in many movie theaters. There is good
separation between the channels, so realistic sound effects are
possible.
Dynamic range
Dynamic range is the difference between the lowest level of sound
that can be heard above the noise of the equipment and the highest
level of sound before distortion occurs.
Dynamic range compression means reducing the gap between the
loudest and softest sounds. This means you can listen at low
volumes but still hear dialogue clearly.
The GUIDE Plus+ System does
not receive any data.
≥Check whether GUIDE Plus+ system setup was performed in full.
The GUIDE Plus+ system data is updated several times each day. When the unit is first
connected, the GUIDE Plus+ system is not yet ready to receive data.
It takes approximately 2 hours to complete data download.
Depending on when you set up this unit, it may take approximately one day before you can
display the television programme list.
≥Check whether the clock is properly set.
≥If signal quality is bad (ghost images or limited reception), the GUIDE Plus+ system may not
be able to receive any data.
19–21
71
—
“No Data” is displayed for some
or all stations.
≥These stations may not have been able to be identified automatically.
For these stations, select the “On” in the SUB MENU under “Editor” and assign the correct
reference station manually.
≥Some stations are not supported by the GUIDE Plus+ system.
20
—
The GUIDE Plus+ information is
not displayed properly.
≥The reference station is not assigned correctly in “Editor”.
Select the correct reference station.
≥There was a programme change.
Check the current programme, e.g. on the Web site for the GUIDE Plus+ system provider or
station provider.
20
—
The GUIDE Plus+ data transfer
was interrupted.
≥The GUIDE Plus+ system shows the data that was received up to the interruption.
≥The programme information may be incomplete.
—
—
The GUIDE Plus+ data is not
updated.
≥The unit must be in standby mode in order to update the data. If the unit is in EXT LINK mode
(EXT-L lights up in the display), then the data update may also not work.
≥Make sure that the time is set correctly.
≥Check whether “Off” is set under “Night Download” and change the setting in GUIDE Plus+.
—
—
21
“No Data” is displayed in the
GUIDE Plus+ system.
≥Programme the Timer recording manually or via S
HOWVIEW. 30
To return all the settings other
than the main ones to the factory
preset
≥Select “Yes” in “Shipping Condition” in the Setup menu. All the settings except for the ratings
level, ratings password and time settings return to the factory preset. The timer recording
programmes are also cancelled.
≥Select “Yes” in “Default Settings” in the Setup menu. All the settings other than the
programmed channels, time settings, country settings, language settings, disc language
settings, ratings level, ratings password, remote control code, return to the factory presets.
≥Press and hold [X CH] and [CH W] on the main unit until the Country setting screen appears.
All the settings except for the ratings level, ratings password and time settings return to the
factory preset. The timer recording programmes are also cancelled.
68
68
—
To reset the ratings level
settings
≥While the disc tray is open, press [DRIVE SELECT] to select the DVD drive, then press and
hold [¥ REC] and [1] (PLAY) on the main unit at the same time for 5 or more seconds.
—
To restore the unit if it freezes
due to one of the safety devices
being activated
≥Press and hold [Í/I] on the main unit for 10 seconds. (The settings remain.) —
Glossary
EH65.book Page 80 Thursday, March 23, 2006 5:18 PM
Find Your Products By Category
Please Login
