0
Owner's of the Avaya Power Supply 106760804 gave it a score of 0 out of 5. Here's how the scores stacked up:
Document No. 10-300090, Issue 1 28-9
Rapid Spanning Tree Protocol
set spantree
Command Mode Global Configuration.
Description Enable or disable individual spanning tree bridges. The default state is
enabled.
Syntax
To Enable: set spantree enable {802.1D | vlan {<vlan-id> | name
<vlan-name>}}
To Disable: set spantree disable {802.1D | vlan {<vlan-id> | name
<vlan-name>}}
Table 28-6. Parameters, Keywords, Arguments
Name Definition
enable Enables the bridge.
disable Disables the bridge.
802.1D Use this keyword if the switch is running IEEE 802.1D
Spanning Tree. For a detailed description of IEEE 802.1D
Spanning Tree, see Chapter 7, “Configuring Rapid Spanning
Tree,” in User Guide for the Avaya P580 and P882
Multiservice Switches, Software Version 6.1.
<vlan-id> The VLAN ID of the bridge.
Use the vlan <vlan-id> keyword and variable when the
switch is running per-VLAN or dual-layer Spanning Tree.
For a detailed description of per-VLAN and dual-layer
Spanning Tree, see Chapter 7, “Configuring Rapid Spanning
Tree,” in User Guide for the Avaya P580 and P882
Multiservice Switches, Software Version 6.1
<vlan-name> The VLAN name of the bridge.
Use the vlan name <vlan-name> keyword and variable
when the switch is running per-VLAN or dual-layer
Spanning Tree. For a detailed description of per-VLAN and
dual-layer Spanning Tree, see Chapter 7, “Configuring Rapid
Spanning Tree,” in User Guide for the Avaya P580 and P882
Multiservice Switches, Software Version 6.1
Find Your Products By Category
Please Login
