0
Owner's of the Avaya Power Supply 106760804 gave it a score of 0 out of 5. Here's how the scores stacked up:
Document No. 10-300090, Issue 1 28-17
Rapid Spanning Tree Protocol
set spantree hold-count
Command Mode Global Configuration.
Description Sets the hold count for a bridge.
The hold count is the maximum number of BPDUs that are sent out a port in
a hello time interval. During any one hello time interval, no more BPDUs
than the number that you enter for <hold-count-value> will be sent out a
port.
Syntax set spantree hold-count <hold-count-value> {802.1D | vlan {<vlan-id> |
name <vlan-name>}}
Systems P580 and P882.
Table 28-11. Parameters, Keywords, Arguments
Name Definition
<hold-count-value> The maximum number of BPDUs that are sent out a port in
a hello time interval. During any one hello time interval, no
more BPDUs than the number that you enter in this field
will be sent out a port.
The valid range for this field is 1 to 10 seconds. The default
setting is 3 seconds.
802.1D Use this keyword if the switch is running IEEE 802.1D
Spanning Tree. For a detailed description of IEEE 802.1D
Spanning Tree, see Chapter 7, “Configuring Rapid
Spanning Tree,” in User Guide for the Avaya P580 and
P882 Multiservice Switches, Software Version 6.1.
<vlan-id> The VLAN ID of the bridge.
Use the vlan <vlan-id> keyword and variable when the
switch is running per-VLAN or dual-layer Spanning Tree.
For a detailed description of per-VLAN and dual-layer
Spanning Tree, see Chapter 7, “Configuring Rapid
Spanning Tree,” in User Guide for the Avaya P580 and
P882 Multiservice Switches, Software Version 6.1
<vlan-name> The VLAN name of the bridge.
Use the vlan name <vlan-name> keyword and variable
when the switch is running per-VLAN or dual-layer
Spanning Tree. For a detailed description of per-VLAN and
dual-layer Spanning Tree, see Chapter 7, “Configuring
Rapid Spanning Tree,” in User Guide for the Avaya P580
and P882 Multiservice Switches, Software Version 6.1
Find Your Products By Category
Please Login
